Design of Customized Plastic Blow Molding Machine

Customized Plastic Blow Molding Machine Fully automatic blow molding machine is mainly used to produce PET plastic containers, it can be PET polyester particles (this process is a one-step structure blow molding machine) or a good PET The bottle preform (this process is a two-step structure blowing machine) is blown into plastic container bottles through molds and certain technological means, which brings convenience to people using various shapes of plastic bottles in their lives.

Customized barrel plastic bottle blowing machine design

(2) Extrusion molding sheet (sheet) material Extrusion molding sheet (sheet) material is widely used. It can be extruded with polyvinyl chloride, polyethylene, polypropylene, polycarbonate, ABS and polystyrene resin. The thickness of the product is 0.20~10mm, and the thickness can reach 40mm. The application equipment for molding extrusion molding is few and simple, the investment in engineering projects is small, the area of the production line is relatively small, and the labor is small. Therefore, the extrusion method is used to form the plate [sheet] Material production, the manufacturing cost and expense of the product are low, the thickness dimension error of the extruded sheet (sheet) material is large, and the strength of the similar product is better, (3) the production of the hot lamination method Plastic plates can be made of polyvinyl chloride resin and thermosetting plastics, and the most commonly used ones are hot-pressed multi-layer plates (sheets) into larger thickness plates. The hot laminating equipment is huge, but the flatness and thickness uniformity of the product are good, and sometimes the delamination phenomenon occurs in the application. (4) The cast plate is formed by the casting method.

The advantages and characteristics of the automatic design and application of the automatic bottle blowing machine: 1. Reasonable design and automatic control, greatly reducing power consumption and manpower; 2. Automatic tube blanking system; 3. Infrared preheating and heating Box to preheat the tube blank; 4. The production process is fully automated, with the advantages of less investment, quick results, convenient and safe operation and maintenance.

Customized barrel plastic bottle blowing machine design

Automatic bottle blowing machine is a very common production machine, widely used in the production of plastic bottles in related industries. The automatic bottle blowing machine will inevitably encounter some deviation problems when performing automatic production. It is also appropriate to cause the difference in the weight of the bottle blowing. After all, the machine will inevitably have some small errors, but we are looking for these subjective factors. Look for some other objective reasons, because these objective reasons seriously affect the accuracy of the weight of the bottle blowing.

Customized barrel plastic bottle blowing machine design

The technology and a part of the employees who came back from their hometown had already been waiting at the door early. After the boss got out of the car, he carried a bag in his hand. Of course, there were sealed red envelopes in it. The boss and every employee said that they worked hard, and Thanks for shaking hands one by one, the red envelope is ready to be released. The bottle blowing machine factory has prepared two big hangings. Although it is now advocated not to release it, it still can't stop the enthusiasm of traditional folk customs. A huge piece of prosperity, everyone is very happy, the day starts, everyone has red envelopes, put together. Behind the red and hot couplets, the four big characters of Dongguan Yitian are particularly eye-catching. Welcome to the plastic bottle blowing machine-blowing machine manufacturer. The author of Plastic Blowing Machine is small] During the usual process of receiving customers, I often encounter some customers of the blow molding machine sending me a picture of a plastic bottle or a plastic bucket, and then asking me what the material is. What the customer of the blow molding machine proposes is what kind of material to use and then the supplier quotes the material required by the customer of the blow molding machine according to the customer's request.

Customized barrel plastic bottle blowing machine design

Re-achieve the originally set temperature, so that the purpose of controlling the temperature of the mold is achieved by means of extra-mold circulation. ③ Mixing mixer, the mixing mixer is mainly used for coloring of raw materials, the combination of more than two materials or multi-component materials. Mixed modification (including cost reduction), ④manipulator, the robot is used to automatically take parts or take out the condensate of the pouring system, etc. After taking the plastic parts or the condensate of the pouring system, a take-out system (weight type, photoelectric type, mechanical type) ) Confirm that most of the manipulators are equipped according to the needs. It can quickly take out the shaped products, reduce the labor intensity of the workers, and also improve the production efficiency. The manipulator can well cooperate with the action of the blow molding machine. It takes the products out of the mold. After that, you can continue to complete the predetermined actions until reset, and at the same time the blow molding machine also continues to perform its own action program, without affecting each other, reducing the time consumption, in addition. Generally, it will not cause personal injury to the operator due to equipment failure,

发送反馈

历史记录