The use and performance of disinfectant plastic bottle manufacturers' products

Although many waste plastic bottles are recycled and stacked together, most of them will breed bacteria and become very dirty. No matter what material you choose to make a liquid plastic bottle, it must first meet the requirements of non-toxic, no peculiar smell, etc. These materials are white and translucent. For flexible plastics, the use of low mold temperature is conducive to the dimensional stability of plastic parts and mechanical properties: a suitable mold temperature can improve the mechanical properties of plastic parts. It should be stored under an awning to prevent exposure to the sun. The high operating temperature is 60°C, and the storage temperature is below 40°C. The shelf life is 1 year from the date of production. Spray plastic bottle

Wet wipes plastic box

The storage time of preforms cannot exceed six months. During transportation, the packaging requirements are relatively high, because it looks particularly obvious after scratching, has high permeability, and the upper wall feels thick, but the price is quite expensive. Extrusion is sometimes also used in the molding of thermoset plastics and can be used in the molding of foam plastics. The rise of environmental protection policies and concepts has a great influence on the plastic packaging of cosmetics. The reason why plastic bottles are non-toxic and harmless The main raw material for making beverage bottles is polyplastics, which is non-toxic and harmless. It is used to hold soft drinks and cola drinks and has no adverse effects on the human body. Wet wipes packaging barrel

Lubricant Plastic Drum

Because there is no secondary pollution, the safety of cosmetics is greatly improved. However, the cost of injection molding equipment and molds is too high and cleaning them is relatively difficult. When used in plastic packaging, plastic bottles made of lightweight polyester have higher safety. This can be further illustrated by the performance of a tray extruder using an integral feed port (ie, a barrel extending through the feed end sheath) as shown in Figure 2. The number represents high-density polyethylene (high-density polyethylene): containers mainly used for the manufacture of cleaning products are resistant to high temperatures but not easy to clean, and tend to breed bacteria, so recycling is not recommended. The products of blow-molded plastic products factory are widely used in our daily life. Its toughness and corrosion resistance can give full play to its role, but it can also cause deformation during use. What is the reason? There are usually two reasons for plastic barrel deformation: melting and creep. Analysis of the characteristics of laundry detergent bottles

Antifreeze bottle

Plastic bottles are required to be dust-proof, moisture-proof, corrosion-proof and waterproof. Acrylic packaging bottles have a wide range of varieties, rich colors, and excellent overall performance. They provide designers with a variety of options. They can be dyed, and the surface can be painted and screen printed. Or paint the space. Generally speaking, when designing acid bottles, companies will not only design patterns, but also design some words, because as a packaging bottle, certain words are needed to explain the product. The mechanical strength is good. Transparent plastic bottles? Generally, they can be used as packaging containers for cosmetics and detergents. For these two packaged plastic bottles and glass bottles, they have always been enemies, and they have a trade-off relationship in the market. Currently, there are three main development directions for new-style plastic plastic barrel packaging materials. Disinfecting wipes box

Laundry Liquid Plastic Bottle

Multi-color printing is possible. There is nothing wrong with the plastic packaging itself. The convex bottom, that is, the center of the bottle bottom protrudes into the bottle to form an arched cavity, which can enhance the internal pressure resistance of the bottle body and the stability of the bottle body. Beverage bottles usually use plastic pe or finger tags. Similarly, the sustainable development of the plastic bottle packaging industry also requires the common progress of related supporting equipment and machinery industries. First of all, ultraviolet light, the dominant factor in photochemical reactions, can directly cause molecular chain breaks. Spray bottle custom manufacturers